Bypass FRP Galaxy S8 Plus, Galaxy S8 Android 8.0, Latest 2018 Method
You can now easily remove google account and add new latest gmail account in your galaxy S8 and S8 Plus device simply by Bypass FRP Galaxy S8 Plus and S8 Android 8.0, in this latest method you will not need downgrade android version from 8.0 to 7.0, you can bypass simply by flashing your device with combination firmware.
Why We Need Combination Firmware?: combination firmware is actually a firmware that would give you access to your device factory binary system, through factory binary we can easily access in your device “Settings”, and then from there we simply enable “OEM Unlock” and enable also “USB Debugging Mode”, these two options help us a lot in Bypass FRP Galaxy S8 Plus and Galaxy S8.
Note: To Bypass Samsung Galaxy frp for Android 7.0, Click Here.
Put your Samsung Galaxy device into Recovery Mode:
-Switch off device.
-Press & hold (Volume UP + Bixby Key + Power Key) together until you see “Android Logo”. Release keys after you see android logo on your screen.
-After that wait for a few second your device enter into “Android Recovery Mode”.
-There you will be able to see your firmware code, in my case i am seeing my firmware code is (G950FXXU2CRED).
-Write down your firmware code, because we have to download “Official Stock Firmware + Combination Firmware” by matching with the code of your device firmware code. (See Below Image)
-We can easily understand from above firmware code, that what is our “Android Version“, and what is our “Model Number” and also “Bootloader Level“, once we match these 3 items with our any firmware code, that means that firmware will work perfect with your device.
Download Official Stock Firmware in your Computer:
-Sing up your free account in Sammobile site, go to that site by click here.
-Login with your account so that you could easily download official stock firmware.
-Tap on “Firmware” tab from top bar.
-Type “Model Number” and search it (See Below Image).
-Select your device country.
-Download “Official Stock Firmware” by matching with the firmware code that you wrote down.
Note: Make sure you are download android 8.0 version firmware, because your device has 8.0 android version.
-Once downloading finish, put downloaded “Stock Firmware” on your desktop.
Download Combination Firmware:
–Click here to download “Galaxy S8 & S8 Plus Combination Firmware”.
-Select the correct firmware from there by matching your device firmware code.
Note: If the last 3-4 code is not matching with your firmware code, so don’t worry about that you can still download that firmware, but make sure, Android Version, Model Number, Bootloader level is matching.
-Once downloading finish, keep “Combination Firmware” on your desktop.
–Click here to download “Odin 3.12.3” flasher tool.
Let’s Start to Flash with Combination Firmware:
-To successfully Bypass FRP Galaxy S8 Plus & Galaxy S8, we need to flash with combination firmware
-Extract downloaded “Combination Firmware”.
-Go to extracted folder of combination firmware.
-Remove “.md5” extension from “Combination File” name just by rename it.
-Because we need only “.tar” extension to flash with.
-Open “Odin 13.1” flasher tool in your computer.
-Click on “AP” from Odin tool, and give there file path of “Combination Firmware“.
Note: Make sure you are giving file path from “Combination Firmware”, in combination firmware extracted, there will be only 1 file, and you also have to change that file extension from .md5 to .tar
Put Samsung Galaxy Device in Download Mode:
-Switch off device
-Pres & hold (Volume Down + Bixby Key + Power Key) together until you see blue warning screen.
-Press (Volume UP) key to continue.
-Now you’ve entered into “Download Mode”.
-Connect device to computer using micro USB cable.
Note: If your device is not being detected by computer, then you download & install “Samsung USB Driver”, click here to download “Samsung USB Driver” and install in your computer.
-in “Odin tool” you will see “ID:COM” will turn to blue, that is for sure that your device has successfully been detected by odin software.
-Click on “Start button” to continue flashing process.
-Once flash successfully finish, you will see “Pass!” sign in Odin tool.
-Disconnect device from computer.
-Your device will auto enter into “Factory Binary Mode”.
Enable USB Debugging Mode:
-Once you access to “Factory Binary” home screen.
-Bring top bar just by sliding from top to down.
-Tap on “Settings gear icon” from top bar.
-Now you are in “Settings”.
-Go to “Developer Options”.
-Verify that “USB Debugging” option is enabled there.
-Go back to “HOME SCREEN”.
-Tap on “IME” from bottom bar, there is option of “IME” this would open calculator.
-Type there code “*#0808#“.
-USBSetting Mode will open.
-Select option from there “DM+ACM+ADB“.
-After that, tap on “REBOOT” button.
Let’s Bypass FRP Galaxy S8 Plus & S8:
-Open internet browser in your computer.
-Type “Download FRP Tools Techeligible“.
-Go to that download page, and download from there “[SAMSUNG] ADB FRP BYPASS” tool in your computer.
-Turn off your antivirus software to avoid file deleting.
-Extract downloaded file.
-Connect Galaxy S8+ or S8 device to computer.
-Go to extracted folder, and right click on “FRP_Techeligible” file, after that select “Run as administrator”.
-This would open up a “CMD Window” on your computer screen.
-Now you will see in “CMD Window” there will be written like “Press any key to continue….“, just press any key or enter key from your keyboard to continue.
-This would auto close cmd window.
-Now again run same “FRP_Techeligible” file, and then again press any key from your keyboard to continue.
-Follow same process 3 times at least to Bypass FRP Galaxy S8 Plus and S8 successfully.
-Congrats now you have successfully bypassed google account from your device.
-Final step is just to flash device with official stock firmware.
Let’s Flash Samsung Galaxy by Official Stock Firmware:
-Open “Odin Software” to Bypass FRP Galaxy S8 Plus.
-Extract the downloaded “Official Stock Firmware”, the one you downloaded from “Sammobile” website.
-Give all the file path in odin software just by matching file name, like in “AP” give AP file, and in “BL” give bl file and so on.
Note: Make sure, in odin “CSC”, give file path of “HOME CSC” instead of CSC only.
-Now Switch off galaxy device.
-Put your device into “Download Mode” again.
-Now connect device to computer.
-Click on “Start Button” to start flashing galaxy device.
-Wait until you see “Pass!” sign in your Odin Software.
-Once you see pass! sign, just disconnect device, and your device will auto restart.
-Now complete initial setup in your device to access home screen.
Note: If you are unable to flash device by Official Stock Firmware, we would recommend you to try to flash device using Old Version Odin Software. Odin Old Version list available here.
You have successfully accomplished this method to Bypass FRP Galaxy S8 Plus and S8, thanks for visiting us.