Bypass FRP Galaxy S8 Plus, Galaxy S8 Android 8.0, Latest 2018 Method
Put Samsung Galaxy Device in Download Mode:
-Switch off device
-Pres & hold (Volume Down + Bixby Key + Power Key) together until you see blue warning screen.
-Press (Volume UP) key to continue.
-Now you’ve entered into “Download Mode”.
-Connect device to computer using micro USB cable.
Note: If your device is not being detected by computer, then you download & install “Samsung USB Driver”, click here to download “Samsung USB Driver” and install in your computer.
-in “Odin tool” you will see “ID:COM” will turn to blue, that is for sure that your device has successfully been detected by odin software.
-Click on “Start button” to continue flashing process.
-Once flash successfully finish, you will see “Pass!” sign in Odin tool.
-Disconnect device from computer.
-Your device will auto enter into “Factory Binary Mode”.
Enable USB Debugging Mode:
-Once you access to “Factory Binary” home screen.
-Bring top bar just by sliding from top to down.
-Tap on “Settings gear icon” from top bar.
-Now you are in “Settings”.
-Go to “Developer Options”.
-Verify that “USB Debugging” option is enabled there.
-Go back to “HOME SCREEN”.
-Tap on “IME” from bottom bar, there is option of “IME” this would open calculator.
-Type there code “*#0808#“.
-USBSetting Mode will open.
-Select option from there “DM+ACM+ADB“.
-After that, tap on “REBOOT” button.
Let’s Bypass FRP Galaxy S8 Plus & S8:
-Open internet browser in your computer.
-Type “Download FRP Tools Techeligible“.
-Go to that download page, and download from there “[SAMSUNG] ADB FRP BYPASS” tool in your computer.
-Turn off your antivirus software to avoid file deleting.
-Extract downloaded file.
-Connect Galaxy S8+ or S8 device to computer.
-Go to extracted folder, and right click on “FRP_Techeligible” file, after that select “Run as administrator”.
-This would open up a “CMD Window” on your computer screen.
-Now you will see in “CMD Window” there will be written like “Press any key to continue….“, just press any key or enter key from your keyboard to continue.
-This would auto close cmd window.
-Now again run same “FRP_Techeligible” file, and then again press any key from your keyboard to continue.
-Follow same process 3 times at least to Bypass FRP Galaxy S8 Plus and S8 successfully.
-Congrats now you have successfully bypassed google account from your device.
-Final step is just to flash device with official stock firmware.
Let’s Flash Samsung Galaxy by Official Stock Firmware:
-Open “Odin Software” to Bypass FRP Galaxy S8 Plus.
-Extract the downloaded “Official Stock Firmware”, the one you downloaded from “Sammobile” website.
-Give all the file path in odin software just by matching file name, like in “AP” give AP file, and in “BL” give bl file and so on.
Note: Make sure, in odin “CSC”, give file path of “HOME CSC” instead of CSC only.
-Now Switch off galaxy device.
-Put your device into “Download Mode” again.
-Now connect device to computer.
-Click on “Start Button” to start flashing galaxy device.
-Wait until you see “Pass!” sign in your Odin Software.
-Once you see pass! sign, just disconnect device, and your device will auto restart.
-Now complete initial setup in your device to access home screen.
Note: If you are unable to flash device by Official Stock Firmware, we would recommend you to try to flash device using Old Version Odin Software. Odin Old Version list available here.
You have successfully accomplished this method to Bypass FRP Galaxy S8 Plus and S8, thanks for visiting us.