Bypass Google Account Galaxy S8 Plus, Galaxy S8, S8 Edge By 3 frp methods
We have 3 best frp methods in this post that will help you to bypass google account Samsung Galaxy S8 Plus, S8, S8 edge Android 8, Android 7, you can try all these 3 frp methods to solve your issues, if 1st method does not work for you, then go for 2nd method, after that go for 3rd frp methods.
|1st Method: Bypass frp Galaxy S8 Plus, Galaxy S8 By Latest Way [Click Here]|
|2nd Method: Bypass frp Galaxy S8 Plus, Galaxy S8 (Android 8) By Samsung FRP Helper [Click Here]|
|3rd Method: Bypass frp Galaxy S8 Plus, S8 edge Android 7 [Click Here]|
1st Method: bypass google account Samsung Galaxy S8 Plus, Galaxy S8 By Latest Way.
This is most latest method to Bypass Google Account Galaxy S8 Plus & Galaxy S8, you have to follow all steps very carefully, because we will download combination firmware just by matching firmware code to your galaxy device, that is very important step, once you get the matching firmware code according to your device firmware, you can easily Bypass Google Account Galaxy S8 Plus and S8 devices. This method is only for device owner.
NOTE: This method is for Galaxy S8 Plus (SM-G955F/FD, SM-G955N, SM-G9550, SM-G955X, SM-G955U), and also for the Galaxy S8 (SM-G9500, SM-G950F/FD, SM-G950N, SM-G950U).
Let’s Start to Bypass Google Account Galaxy S8 Plus / S8:
-First of all we have to write down our device firmware code.
-Switch off your device.
-Put your device into “Android Recovery Mode” by press and holding keys (Volume UP + Bixby Key + Power key) together.
-Release keys once you enter into “Android Recovery Mode”.
-There you will be able to see your device “Firmware CODE”.
-As you can see, in my case my device firmware code is (G950FXXU2CRED).
-This is bootloader level 2 firmware code, how did i recognized that it is bootloader level 2 firmware, i just see a digit no “2” right after my device model number (G950FXXU2).
-You just have to note down your this firmware code, because we have to download exact firmware code just by matching model number and bootloader level number.
Note: To Bypass Google Account Samsung Galaxy Android 7 (Click Here)
Download Galaxy S8 Plus Combination Firmware in your PC/LAPTOP:
-Choose correct combination firmware from below, and download it into your PC/LAPTOP.
♥ Galaxy S8+ (SM-G955F/FD)
♥ Galaxy S8+ (SM-G9550)
♥ Galaxy S8+ (SM-G955N)
♥ Galaxy S8+ (SM-G955U)
♥ Galaxy S8+ (SM-G955U1)
♥ Galaxy S8+ (SM-G955D)
Download Galaxy S8 Combination Firmware in your PC/LAPTOP:
♥ Galaxy S8 (SM-G950U)
⇒ COMBINATION_FA70_G950USQU5ARG4 Bootloader 5 [DOWNLOAD]
♥ Galaxy S8 (SM-G950N)
♥ Galaxy S8 (SM-G950UW)
♥ Galaxy S8 (SM-G950F/FD)
♥ Galaxy S8 (SM-G9500)
Note: If you are unable to find your Combination File, Click Here to Search More Galaxy S8 and S8 Plus Combination Firmware
Download Official Stock Firmware:
– After you download “Combination Firmware”, now you also need to download “Official Stock Firmware”.
– Downloading official stock firmware is very easy, just follow below steps.
– Go to your “PC Browser”.
– Type in google search bar “Download Sammobile Firmware“.
– Open very first search that related to “Sammobile Firmware”.
– Type your device model in search bar option.
-Now go down, and there you will be able to see a list of “Firmware”.
-Download firmware from there according to your device android version and country.
-Once downloading finish, now final step is to download frp bypass tool.
Download FRP Bypass Tool:
Flash Galaxy Device with Combination Firmware:
-Keep all downloaded files and frp tools on your desktop including (Combination Firmware + Official Stock Firmware + Odin Software + ADB FRP Bypass).
-Alright, now turn off your antivirus software to avoid any type of interruption while flashing device.
-Extract all downloaded files.
-Go to extracted folder of “Combination Firmware”.
-Right click on “Combination File”, and then click on “Rename”, after that remove “.md5” from file extension.
-Now Open “Odin Software”.
-Click on “AP”, and then give file path of “Combination Firmware”.
Note: Make sure you have extracted combination firmware already, and removed “.MD5” from combination file extension.
-Put device into download mode by pressing (Volume Down + Bixby Key + Power Key).
-Once you see blue warning! screen, just press (Volume UP) key to continue.
-After that, connect device to computer by micro USB Cable.
-Now you will see in “Odin Software” there will appear “ID:COM” port number, and this will turned to “BLUE Color” that means your device has successfully connected to computer.
-Click on “START” button to flash Galaxy S8 Plus / S8 device.
-Wait until you see “Pass!” sign in Odin software.
-After flashing process finish, your device will auto restart.
-After restart, device will auto enter into “Factory Binary mode”.
Let’s Enable ADB Mode:
-Swipe down from top of the screen.
-Tap on “Settings gear icon” from top right corner (See Below Image).
-Now go down, and then tap on “Developer Options”.
-Make sure that “USB Debugging” mode is enabled from there.
-Go back to very first home screen.
-Tap on “IME” from bottom of your screen.
-Calculator will be launched right after you hit ”
-Type code there “*#0808#“.
-USBSetting Mode will open.
-Select option from there “DM+ACM+ADB“.
-After that, tap on “REBOOT” button.
Bypass Google Account Galaxy S8 Plus / S8:
-Go to the folder of “ADB FRP BYPASS”.
-Right click on “RUN” and then run as administrator.
-Now “CMD” will open.
-Connect device to computer, make sure your Samsung Galaxy Device is on.
-After that you will see in your “CMD” window, there will be a message like “Press Any Key to continue…”.
-Just press any key from your keyboard to Bypass Google Account Galaxy S8 Plus & Galaxy S8.
Note: if you do not see any message like this, just close “CMD” window, and then reopen it (See Below image)
-Congrats, now you have successfully done to Bypass Google Account Galaxy S8 Plus.
-Let’s Flash Galaxy S8+ and S8 by official stock firmware.
Flash Device By Official Stock Firmware:
-Put your device into “DOWNLOAD MODE” again.
-Connect device to computer.
-Open “Odin Software”.
-Give all the file path in odin software just by matching file name, like in “AP” give AP file, and in “BL” give bl file and so on.
Note: Make sure, in odin “CSC“, give file path of “HOME CSC” instead of CSC only.
-Now click on “START” button to flash Galaxy S8+ and S8 device.
-Wait until you see a message “PASS!” on your Odin software.
-after flashing process finish, disconnect device from computer.
-Device will auto restart, after complete initial setup to access your device home screen.
♥ Download Combination Firmware + Official Stock Firmware.
♥ Download Also FRP Bypass Tools.
♥ Turn off antivirus & Keep all files on Desktop.
♥ Extract downloaded files.
♥ Open Odin Software, Give file path of (Combination Firmware File), make sure remove .md5 from extension.
♥ Put Galaxy device into DOWNLOAD MODE, and then connect device to computer.
♥ Click on Start button to flash device with combination file.
♥ Enable ADB Mode in your device.
♥ Bypass Google Account Galaxy S8 Plus & S8 by (ADB FRP BYPASS) tool.
♥ Again flash device with (Official Stock Firmware).
2nd Method: Bypass Google Account Galaxy S8 Plus, Galaxy S8 (Android 8) By Samsung FRP Helper Software Free.
Bypass Google Account Galaxy S8 Plus as well as Galaxy S8 android Oreo 8.0, you can easily bypass google verification from these both devices, if you have forgotten your gmail id, and unable to access your device after soft reset or hard reset, so from here you would be able to solve your this problem in just few minutes.
Worth to Note: This method has successfully been applied on Galaxy S8 (SM-G950F), and S8 Plus (SM-G955F) Android 8.0.
Downgrade Android Version 8.0 to 7.0:
-First of all, you do have to downgrade your android version from Oreo to Nougat to Bypass Google Account Galaxy S8 Plus and S8.
-Click Below to downgrade android version.
-After successfully downgrading android version, you are compatible to bypass google account.
Let’s Start to Bypass Google Account Galaxy S8 Plus | S8:
♥ Connect Wi-Fi to your device first.
♥ Go to “Verify Your Account” screen.
♥ Tap on “Enter Email or Phone” field to bring “Keyboard”.
♥ Long tap on “Settings gear” icon, after that select “Settings” from there.
♥ Swipe down, and tap on “About Samsung Keyboard”.
♥ Tap on “UPDATE”.
♥ Select “i have read and agree all the term..”, and then tap on “START”.
♥ Tap on “Search icon”, and type “Calculator”.
♥ Tap on “Calculator”, and after that tap on “Download icon” to downloading and installing calculator app.
Type Code to Enable ADB Mode:
♥ Open “Calculator”.
♥ Type code in Calculator ” (+30012012732+ “
♥ After that, DRParser Mode will open, type code there ” *#0808# “
♥ USB Setting will open, select “DM + ACM + ADB“, after that tap on “Reboot“
Note: Put your device on “Welcome Screen”, do not turn it off.
Download Flashing Tool:
♥ Turn OFF antivirus software to avoid file deleting).
♥ Turn off “Firewall” to avoid port blocking
♥ Install “Samsung USB driver”.
♥ Extract “SAMSUNG FRP HELPER” software.
♥ Run “Samsung frp helper” software.
♥ Connect your “Galaxy S8 or S8+) to computer.
♥ Click on “Scan” button, and you will get your device com port.
♥ Click on “ADB MODE“, After that click on “REMOVE FRP” button.
Note: If you see “NO DEVICE FOUND”, no problem by clicking 6-7 times on “Remove FRP” button, software will detect your device and will start to Bypass Google FRP.
Unable To REMOVE FRP? then follow below method:
♥ If you’re unable to Bypass Google Account Galaxy S8 Plus , Galaxy S8, follow alternate method.
♥ Extract “All in One Tool” file.
♥ Run “All in One Tool”.
♥ Click on “GSM FLASHER Bypass Adb Tool“.
♥ Switch on “Galaxy S8|S8+” Device.
♥ Reconnect Device to computer
♥ Allow USB Debugging option, if you get.
♥ Now wait 1-2 minute “GSM Flasher Bypass ADB Tool” will detect your device.
♥ Just click on “REMOVE FRP” button.
3rd Method: Bypass Google Account Galaxy S8 Plus, S8 edge, Nougat 7.0:
Easiest method to bypass FRP Protection Galaxy S8 Plus and S8 edge, as well on Nougat 7.0 and Android-N, you have to download some software and ADB File in your computer, and then simply flash your device through Odin Software, all details step by step you can read below.
Let’s Begin to Bypass FRP Protection Galaxy S8 Plus:
Step 1: Download Below Software and files in your Computer Desktop/Laptop.
Once downloading finish of all above 3 software and file, drag all software on your PC Desktop.
Let’s enter in Download Mode of Galaxy S8 Plus:
Step 2: Press Power key + Volume Down Key + Bixby Key together for few second till “Blue Screen” appear on your android screen, there you will have message of “WARNING”, so press “Volume UP” key from there to go into Downloading Mode of your galaxy S8 plus and S8 edge.
Connect Your Device with Computer / Laptop:
Step 3: Extract, install and open “Odin software” to Bypass FRP Protection Galaxy S8 Plus, and after connect your S8 Plus and S8 Edge android device with your PC or Laptop, to make sure its connection is ok, just see inside “ODIN Software”, there will be one “O:[COM6]” on the left top side of Odin, same as in below image:
Now inside “ODIN Software”, click on “AP” button, and then give the file location of “ADB ENABLED.tar”, this the file which we have downloaded already before, so give this name file location into Odin software, and then click “START” button from odin, and wait till this process finish, on finishing this process, you will have “PASS” green color message on your ODIN top left BOX, and also your android device will restart automatically on the completion of Odin process, now wait and let your device turn on properly.
Step 4: Once your device turned on properly, now go back to your pc, and right click and extract “FRP Remove ADB File” software on your desktop, remember this software we have downloaded before from top of this post. once extraction finish, go inside extracted folder, and from there
While pressing “Shift key” press “Right Mouse Button” together.
and then you will have right click menu on your computer screen as shown in below image.
After that, from right click menu, you have click on “Open command window here”, so you will have a cmd window on your computer screen, now make sure, your mobile is connected to fastboot, for that we have to type in cmd window this below code.
After pasting above adb devices code in cmd, you must get your android device detail there, which will make sure that your device is connected to fastboot.
Step 5: Copy ADB Commands, and then copy “CODE-1” and past into your command prompt cmd, and then press enter key from your keyboard, once implementation of this finish, again do same thing with “CODE-2”, and then “CODE-3”.
adb shell content insert –uri content://settings/secure –bind name:s:user_setup_complete –bind value:s:1
adb shell am start -n com.google.android.gsf.login/
adb shell am start -n com.google.android.gsf.login.LoginActivity
Final Step: Restart your device, after completing above 3 code process, and then you will have initial setup on your S8 Plus and S8 Edge android device, just complete that initial setup, and you are done to Bypass FRP Protection Galaxy S8 Plus, Galaxy S8 Edge, Android 7.0, and Android-N.
Thanks for visiting us. Make comment below, if you have any trouble while following these frp bypass methods.