Bypass FRP HUAWEI P20 Lite EMUI 9.1.0 by Installing Updates

Download firmware from below just by matching your device model no, after that extract the downloaded firmware and then copy dload folder in your SD Card. After that, you will be able to install updates from dload folder in your device to Bypass FRP HUAWEI P20 Lite (EMUI 9.1.0). Follow up methos from below.

Remember: Do not try this frp method on a stolen phone. This is a serious crime, if you are trying to bypass frp on a stolen phone. You may also be jailed, because this process is for device owner and for educational purpose only. Just to assist device owner, how they can recover back their phone and setup new account.

Let’s Start to Bypass FRP HUAWEI P20 Lite:

-Download any 1 firmware in your PC that relevant to your device model number.

-Extract the download firmware, and give the password from the above (Password for ZIP) file.

-Connect SD CARD to your PC and then copy “dload folder” from your firmware and past that folder in yoru SD CARD Root folder.

-Make sure your SD Card has FAT32 File System, if its not, then you can format your SD CARD with FAT 32 file system.

Let’s Install Updates:

-Turn off your Huawei device.

-Insert SD Card.

-Put device into to update mode.

-Press and hold (Volume UP + Volume Down + Power) keys together.

-Keep Pressing all keys together.

-Release only “Power Key” once you see HUAWEI Logo on your screen, but keep pressing both volume keys.

-Release both volume keys after you see “EMUI” logo on your screen.

-Perfect, now we have successfully put our device into “Update Mode”, now the device will automatically receive all necessary updates from the dload folder.

-This process may take several minutes in installing updates, after that, device will auto reboot.

-It may also take several minutes on “HUAWEI” logo.

-Afterward you will see first “Welcome” screen.

Let’s Put Device into Recovery Mode for Hard Reset:

-Turn off your P20 Lite.

-Now Long Press (Volume UP + Power Key) together.

-After that, Release only (Power Key) once you see “HUAWEI” logo, in the meanwhile keep pressing (Volume UP) key.

-After 4-5 seconds, release also (Volume UP) key.

-Perfect, now you are inside your device recovery mode.

-To Bypass FRP HUAWEI P20 Lite, we have to format our device, so you will lose your data.

-Tap on “Wipe Data/Factory Reset”.

-After that, type “YES” and then again tap on “Wipe Data/Factory Reset”..

-Now Again tap on “Wipe Data/Factory Reset”.

-Once the Data/Factory Reset process finish, your device will restart.

-After restart finish, now you can easily use your device normally, just complete initial setup to access main home-screen.