Remove Google FRP Galaxy S20 FE Android 13, 12, 11 (Updated)

FRP feature is the best feature to protect your device data from leaking, and unknown reach. But, if you forget your own signed in google account after hard reset the device. In this condition, you must follow FRP bypass process from here to Remove Google FRP Galaxy S20 FE (Android 13, 12, 11). There are many android version devices available of Samsung S20 Fe, that is why, we’ve merged all android version posts in this single post. You can apply method according to your device android version.

Warning: This method is only for device owner and for educational purpose only.

4 Methods Available below to Remove FRP:

Method 1: Remove Google FRP Galaxy S20 FE (Android 13)

-Turn on your Samsung S20 FE phone & Connect to WiFi network.

-Go back on first (Welcome or Start) screen.

-Dial code *#0*# from emergency call option. After that, you will see (Blank Boxes) page same as shown in below image.

Connect Samsung Phone With PC:

-Lets connect your device with PC using proper USB cable.

-Open “Device Manager” in your PC to check and confirm, that your device has been detected by PC successfully.

-If the device is not detected, in this case, download & install Samsung USB Drivers.

-Reconnect Samsung S20 Fe phone, and you will see your device info in device manager same as shown in below image.

-We are all done from Samsung phone side, lets get back to PC screen.

Use Zeroknox Tool to Remove FRP:

-Download & Launch (ZeroKnox Removal Tool) on PC to Remove Google FRP Galaxy S20 FE .

-Turn off your @ntivirus software before extracting this tool.

-Launch Zeroknox tool on PC, and click over “Enable ADB (june 2023) button.

Note: If this option is not working, you can try with other 2 more options from Zeroknox tool to enable adb mode.

-Click to > Yes > Ok from popup window.

-The ADB Enabling… process will begin, you will receive allow usb debugging popup in Samsung galaxy device, just check mark option of “Always allow from this computer”, and hit on “Allow”.

-Wait till (Enabling ADB…) process is done. After that, tap to “Reset FRP (ADB Mode)”.

-This will take just 20-30 to remove frp. After that, your Samsung device will auto restart, and you are all done with this ZeroKnxo tool.

Method 2: Remove Google FRP Galaxy S20 FE

-Turn on device & Connect WiFi.

-Afterwards, go back to (Welcome) screen, and long press both (Volume UP + Down), and hit on “Use”.

-Let’s hold again both (Volume UP + Down), and then draw a reverse “L” same as shown in below screen shot.

-After that, from popup box, just double tap to “while using the app”, and then double tap on “Use voice Command”.

-As soon you see green border, so speak there loudly “Open Google Assistant”.

-You will be redirected to Bixby screen, from there sign in with your any Samsung Account, you can create this account in free of cost from Samsung official website.

-Hit on “Sign in” button from bixby screen and login with Samsung account.

-After signed in completely, you will see a popup window of (Want a faster way to sign in), just tap to “Cancel”.

-Tap on > Continue > Continue.

-There you will have keyboard icon, just tap on that, and type there “Youtube”, and hit on “Go” from bottom keyboard corner.

-You will be redirected to youtube website safely.

-Tap “Profile icon” from top corner, and go to “Settings”.

-Go to > About > Google Privacy Policy.

-After reaching chrome browser, tap to > Accept & Continue > Next > No Thanks.

Download S21 FE FRP Apps:

-Search in chrome browser “Download Samsung frp tools“, and visit our website searched result.

-Download from there below applications.

1/ Package Disabler Pro.

2/ Notification Bar.

-Now, we have download & install another app directly from galaxy store, this is very essential app.

-Tap to “Open File Shortcut App” from same frp tools page, and you will be redirected inside galaxy store, if you are asked to update, just tap to “Update” button, this will start updating galaxy store.

-You may be redirect back to frp tools page, from there, hit again on “Open File Shortcut” app, and then tap to “Install”‘.

-After installing successfully “Files Shortcut” app from galaxy store, just tap to “Back Arrow” from bottom left corner to get back to Samsung frp tools page.

-Now tap on “Open XShare App“, and this is also required to be installed from Galaxy store.

-After that, go back to “Samsung frp tools” page, from there tap to “Access Device Settings” link to reach directly inside your Samsung Galaxy settings.

-Scroll down, and go to > Privacy > Permission Manager > Files and Media.

-Hit on “3 dots” from top right corner, and tap to “Show System”.

-After that, just go down, and hit on “Xshare” app from app list.

-Select “Allow management of all files”, and then hit on “Allow” from popup.

-By tapping on back arrow carefully, just get back to again “Download frp tools” page.

-From there, hit again on “Open Xshare App“, and hit on “Open” button from galaxy store to reach inside this app.

-Hit on > Agree and Continue > While using the app > Enter > Receive.

-From popup window, tap to 3rd option “Allow” from Access Camera, and then hit on “While using the app”.

-Now, you will see there 2 option of “Allow”, so now hit 3 times on each (Allow) option.

-Go back by tapping (Back Arrow) from bottom left corner 2 times to reach back to (Xshare Galaxy Store) same as shown in below image.

-Search in galaxy store “File Shortcut”, and the tap to “Open” icon to launch this app.

-Hit on “Menu” icon from top left corner, and select your “Mobile Model” as storage.

-Tap to “Downloads” option to reach inside the downloaded app folder, from there tap to > Notification Bar > Continue > Install > Open.

-Hit on > Accessibility > Installed apps.

-Now hit on > Notification bar> Turn on > Allow.

-Swipe down from top to get notification bar, and this will come out, now turn off “WiFi”.

-Tap 4-5 times on back arrow from bottom left corner to get back to download folder, where from we are gonna installed (Notification bar) app.

-Now tap to > Package Disabler Pro > Continue > Install > Open.

-Tap to “Allow”, and hit on white screen anywhere, the screen will just start blinking.

-Now you have to bring back (Notification) bar from top, and go to “Settings”.

-Go to > Privacy > Permission Manager > Files and Media.

-Just go to “3 dots” from top corner, and tap to “Show system”, from the app list, just go to “Package Disabler Pro”

-Select “Allow management of all files”, and then tap to “Allow”.

-Tap to back arrow 2-3 times to reach back to “Settings” page.

-Now tap to “Back Arrow”, and there you will have a same screen shown in below image, just hit on “i agree” option, and tap to “Enable” button.

-Tap to > Activate > Agree.

-Bring back notification bar, and turn on “WiFi” from there, and wait over there.

-Now hit on “Agree” button from package disabler pro app.

-You will see a flash popup “Knox license validation completed successfully”, we did this all effort just to activate this somehow, once you done this, now we are only few steps behind from completely remove google frp Galaxy S20 FE.

Finish Setup Wizard:

-Hit on “Search icon” from All packages screen, and Type “Setup”, and go to “Android Setup” from there, check mark top “Disable” option (Follow below image).

-Type “Setup”, and go to “Samsung Setup Wizard“.

-Just tap on “Clear Data” button, and the time will start appearing up at top bar.

-After hitting on clear data button, just tap “2 times” on back arrow, and there you will see popup window, just select “Samsung setup wizard” and tap to “Always”.

-Tap to > Skip > Finish, after that open your device > Settings > About Phone > Software information.

-Tap 7 times quickly on “Build Number” to enable developer mode.

-Go back to (Settings), from there tap to “Developer Option”, and turn on “OEM Unlocking”.

-Go to > Settings > General Management > Reset > Factory Data Reset > Reset > Delete All.

-Give your Samsung account password there to complete this process.

-The device will auto restart, and now your device is free of FRP, and old synced google account has also been deleted, thanks for visiting us.

Method 3: Bypass Google Account Galaxy S20 FE Android 12 [2022]

You can do this Without Restore and update and without Samsung Cloud Account, you are not required to backup (Alliance Shield x) app, without all of these, you can easily bypass frp from your device, that is very simple and straight forward method, good news is that, the (Alliance Shield X) app has also been updated in Samsung Galaxy Store, so all we need to access galaxy store and install this app without any Samsung Account.

-We are going to turn on talkback to reach google chrome browser easily, so long hold both “Volume UP Buttons + Power Buttons” simultaneously, after that tap on “Use”.

Note: If (Volume UP + Power) do not work, then try with long press both (Volume UP + Volume Downs buttons)  to turn on talkback, even then, if you are failed to turn on talkback, then you will have to go for an alternate method to launch browser via PC.

–Keep holding both keys again (Volume UP + Power), and this time the talkback feature will turn on completely, you will also have a flash message on screen.

–Now just make “L” shape by swiping on screen from right to left, and then swipe top. (See below image).

-Tap once on “while using the app”, now double tap on anywhere on screen.

-Tap once on “Use Command Voice” option, and again double tap on popup box.

–You have to speak very loudly (Google Assistant), and you will see a (Try Saying) popup window.

-Long press both buttons (Volume UP + Power)  to just turn off talkback feature, if these 2 keys do not work for you, so press both (Volume up/down) keys, and the talkback will be turned off successfully, afterwards, tap on “Keyboard” icon.

-Access to youtube website by searching “You”, and hit on “Youtube” icon.

-You will see a human icon at top corner, just tap on that > Profile icon > Settings.

-Tap to > History and Privacy > Youtube terms of service.

-Go to > Accept & Continue > No Thanks.

Go to FRP Tools Page:

-Type “Download Top Samsung FRP Tools“, and visit our website searched result.

-From our website page, just go down and tap on “Open Samsung Galaxy Store“.

-Select “Get news and Special Offer”, and then tap to “Agree” option.

-You will have galaxy store update screen, tap on “Update”, just wait, as soon as you see “Installing…” screen, quickly tap on “Back Arrow” from bottom left corner before the installing finish.

Note: Do not let installing.. process complete, just tap on “Back Arrow” as soon as you see “Installing..”.

-You will see there galaxy store has opened, but wait for 1 minutes, you may could see again (downloading…) screen, if you see again, just wait there, hit again on back arrow as soon as you see “Installing….”, and you will get back to “frp tools” page.

-Tap again on “Open Samsung Galaxy Store” again, and this time without updating, you will reach inside Galaxy Store.

-Tap to > Continue > Skip.

-Give some app permissions by tapping on  > While Using the app > English.

-Type in search box “Alliance Shield X”, and then tap to “Alliance Shield X” app icon.

-Tap on “Install”, and hit on “Later” from sign in window to Remove Google FRP Galaxy S20 FE Android 11 without restore and Samsung Account.

-Tap to “OPEN” button to reach Alliance Shield X app, if you don’t have an account, so you can register new account by tapping on “Resister” option, otherwise just sign in.

-Other remaining steps are already included in below Method-2, so follow remaining steps by clicking here.

⇑ GO TO TOP

Method 4: Bypass Google FRP Galaxy S20 FE

The Required Tools Are:  WiFi Connection |  Gmail Account | Computer | Any Other Android Phone, these tools are very essential in order to bypass frp account easily, and almost everyone have these and easy to access to these list of tools, so lets start the method now.

–First of all, Download & Open Easy Samsung FRP Tools in PC [Click here to Download].

-Connect WiFi in Galaxy S20 FE device, and then connect the device with PC using Data cable. (Make sure the Device is turned on).

–From the software, tap to “Bypass FRP”.

-Tap on “OK” from popup window as well.

-After few seconds, you will receive a popup box of (Easy Firmware), tap to “View” from your android phone screen.

–Tap to > Accept & Continue > Next > No Thanks.

We have to Reach Galaxy Store:

-In chrome browser search box, type “Download Top Samsung frp tools“.

-Visit our website searched result same as shown in below image.

-Go down and tap on “Open Samsung Galaxy Store“.

-Tap to “Cross icon” to close the popup message, and then hit on “Centered Option”.

-Check mark the option “Get new and special offer…”, and then hit on “Agree”.

-From galaxy store screen, check mark the option “Automatically update the Galaxy Store”, and then tap to “Update”.

-Tap on “Centered Option” again by following below image to open Galaxy Store app.

-Tap to “Search icon” from top corner, and search there “S9 Launcher”.

-Tap to “Download” icon, and then sing in with your Gmail account, afterwards, tap to “Open” icon to launch the S9 Launcher.

Follow Steps in Other Android Device:

-In other android device, Go to > Settings > Accounts & Backup > Accounts.

-Sign in there with your same Gmail account, which has already been added in S20 FE device while installing (S9 Launcher).

Note: Make sure, your both android devices are on same WiFi network and on Same Gmail Account.

-Open “Play Store” in other android device, and install “Alliance Shield X” app.

-Go to > Settings > Accounts and Backup > Backup And Restore > Back up data.

-Check mark option (Select All), and tap to “BACKUP UP” button.

Follow Below Steps in Galaxy S20 FE:

-In Samsung Galaxy S20 FE (frp Locked) device, we will restore all data.

-Once more time, do make sure, your both devices are on same Samsung Account, for that, we will check in Galaxy S20 FE as well, to check that, just go to “Settings”, and the top you will have your signed in (Samsung Account), just match that with your other android device.

-Go to > Settings > Accounts & Backup > Restore Data > Update.

-Wait for few minutes, this will take time in updating all apps.

-Again hit on > Restore Data > Select all apps > Restore > Install, now wait until restoring data process completes.

-After restoring all apps successfully, lets get back to “MENU”.

-Open “Alliance Shield X” app from there.

-Tap to > Next > Next > Next > Got it.

-Tap on “Register” button.

-After completing the registration process, just sign-in with your registered account in (Alliance Shield X) app.

-Type any “Device Name”, and then tap to “Next”.

-Turn on “Device Admin”, and hit on > Activate > Next.

-Turn on “Knox”, and select option (i have read and agree…), and tap to > Confirm > Next > Finish.

-Go to “App Manager”, and tap to “Close” from popup box.

-Hit on “Search icon” from top corner, and search there “Mode”, and tap to “Service Mode”.

-Tap to “Activities”, after that go all the way down, and tap on option (com.sec.android.app.modemui.activities.usb.settings).

-Tap again on (com.sec.android.app.modemui.activities.usb.settings), and again hit on “OPEN”, and then select (DM+MODEM+ADB).

Remove FRP With ADB :

-Download & Open (Samsung FRP ADB) tool in your PC [DOWNLOAD]

-Connect your device Samsung S20 FE again to PC.

-Extract & Open “FRP Bypass ADB” tool in PC

-This tool will start automatically, and will Remove Google FRP Galaxy S20 FE in few seconds, wait until this process finishes.

Note: In your Samsung Device, you will have a popup widow (Allow USB Debugging?), just tap to > Allow > Allow, afterwards, the ADB Tool will detect your device and will start bypassing frp lock.

-Now the device will be restart automatically, after that select the (Setup Wizard) icon, and boom, you are in your device HOME SCREEN.

Let’s Perform a Factory Reset Task:

-Go to > Settings > General Management > Reset > Factory Data Reset > Reset > Delete All.

-Type your Gmail Account password, tap to “OK”.

-The device will be restart automatically to finish factory data reset process.

-All signed in Gmail account have been removed permanently from this device, now you can access to your device home screen easily without signing in with any Gmail account.