Have you lost your google account that was setup on your hard reset device (ZTE AXON 40 Se)? Then, you will not be able to go through google verification screen until you recover and your login again with same google account. You can get help from this post to Bypass FRP ZTE AXON 40 SE. We will use ZTE Switch app to receive (Activity Launcher) app from other android phone. Follow up steps for better understanding.
Disclaimer: We highly recommend you to apply this method only on your own device, if you are not owner of this device, or you found this from some where, you must return to its real owner. This method is for educational purpose only.
Required Tools:
1st: WiFi Connection.
2nd: Any other Android Phone.
3rd: PIN locked Setup SIM Card.
Let’s Start to Bypass FRP ZTE AXON 40 SE:
-Before starting frp bypass process, you are required one more android phone.
-In other android device, firstly, install “Activity Launcher” application from google play store.
-We will use this device later on and will transfer this installed (Activity Launcher) app to our device ZTE device to bypass frp account.
-You are also required a SIM card, that has already 4 digits pin locked code setup. Don’t you have any PIN locked setup SIM card? Don’t worry, you can setup this easily by yourself just by Click Here.
-Let’s begin frp bypass steps by switching on your ZTE Axon device.
-Disconnect WiFi from your device. We don’t require any WiFi connection right now.
-Insert a PIN locked setup SIM card on your ZTE device.
-You will have black screen of (Enter SIM PIN).
-After inserting the SIM card correctly, you must have black screen asking you to enter PIN code. But, you don’t need to enter pin code here.
-You have to follow up below steps very quickly without wasting a seconds.
-Eject SIM card and quickly press “Button”.
Note: As soon as you eject sim card, without wasting a seconds, just quickly press “Power” key as well to turn off the device screen only.
-Press “Power key” again to wake up the device and you will have a (Not signed in) popup message on screen. If you did this correctly, you must see the (Not signed in) there. Otherwise repeat steps until you get this message.
-Drag down the (Not signed in) message to get top notification bar. From there, hit on a “Edit” icon from top corner to Bypass FRP ZTE AXON 40 SE.
-After that, you will be shown a notification bar main menu. From there, drag (Ultra Battery Saver…..) option from bottom to the top at 2nd number same as shown in below image.
-Once its done, just go all the way back to first startup page.
-Insert PIN locked sim card again. Once you see (Enter SIM PIN) screen.
-Just eject sim try and quickly press “Power key” to turn of the screen.
-Press “Power key” again to wake up the screen, and you will have a (Not signed in) popup message there.
-Drag down that (Not signed in) message to get top notification bar again.
-This time, you will see (Ultra Battery Saver) option at the 2nd number on top notification bar. Just, quickly, tap on that (Data) option.
Note: If the (Ultra Battery Saver…) option is not highlighted, or its not working, you will have to try again by ejecting sim tray and insert sim tray again and again bring up top notification bar and try to hit on “Data” option. After few tries like this, you will be able to hit on (Data..) option successfully, and will reach to next page.
-From popup window of Ultra Battery Saver, just tap to “Ok” option (See below image).
Share (Change/Switch Phone) app to Other Android Device:
-Swipe up on the black not signed in page. After that, tap to “Add” option and select “Change Phone” app from main menu app list.
-Tap on “Change Phone” app from ultra battery saver screen to Bypass FRP ZTE AXON 40 SE.
-From popups screen, give some permissions by hitting on > Ok > Accept > Allow.
-Tap on > Share Switch Phone > Share > Activate.
-Turn on “Bluetooth” also from your other android phone and keep that device nearby to your ZTE AXON 40 Se.
-Within a minute, your ZTE device will locate your other android device, just connect both devices together via Bluetooth. After that, your chosen (Switch Phone) app will be transferred to your other android device successfully.
-Let’s install and open (Switch Phone) application in your other android device which you received from ZTE device.
-You may also have to give some permissions by tapping on (Accept, Allow etc).
-Once the app is fully launched in your other android device, just tap on a “Previous or Old” option same as shown in below image. Hit on “Settings” from popup window and turn on “Change Phone” application from app list.
-After turning on “Chang Phone” app, just tap on a “Back Arrow” icon from bottom to go back to main menu page of the change phone app.
-Tap again on “Previous or Old” option. If you see again a “Note” popup window, just do this again. Go to > Settings > Turn on (Change Phone) app and tap to “back arrow” icon from bottom to go back to main menu screen of the change phone app. You may have to repeat this few more times.
-After giving all permissions, finally, tap again on “Previous or Old” option. After that, you will be shown a “QR Code” scanner screen.
-From your (ZTE Axon 40 Se) device, just go back to main ultra saver black screen same as shown in below. From there, tap on “Change phone” app. From popup window, check mark the option and hit on “Accept”.
-Tap on “New” option to Bypass FRP ZTE AXON 40 SE.
-Give some permissions by hitting on “Allow or while using the app”.
-If your device WiFi is switched on, then, you must face another popup window asking you turn off the WiFi, from there, tap on “Settings” option and turn off your device “WiFi”. After that, tap to “Back Arrow” from top right corner.
-Finally, you will have a “QR Code” on your ZTE device screen.
Send Activity Launcher App to ZTE AXON 40 Se:
-Scan this QR Code using your other android device. After that, both devices will be connected together.
-In your other android device, you may face a popup screen asking you to allow some more permissions. Just tap to “While using the app & Allow” option.
-In other android device, you will see app (, Video, Image, document, application) screen. From there, go to “Application” option.
-Choose only “Activity Launcher” app. After that, go back by tapping on “Back Arrow” icon from bottom.
-Finally, hit on a “Start Cloning / Start Change” option to transfer the selected app (Activity Launcher) to your ZTE device.
-Wait until app transferring process is completed. After that, hit on a “Done” option form your ZTE device.
-Double tap on the “Back Arrow” icon from ZTE device to go back to main ultra battery saver black screen.
-Tap on “Add option”, after that, choose “Activity Launcher” app.
Let’s Launch Activity Launcher app:
-Tap on “Activity Launcher” app from ultra battery saver screen.
-From popup window, tap to “Ok / Accept”.
-Wait on a loading screen.
-Hit on “Android Setup”, you will see there a big list of too many android setup, just scroll down, and tap to “com.googel.android.setupwizard.deferredTramplineactivity” same as shown in below image.
-After that, you will be redirected to the finish setup page. From there, tap to “Start” option from bottom right corner.
-Tap on “Skip”. After that, you will reach back to WiFi screen. Connect WiFi to your device from that screen.
-After that, from the WiFi page, tap on “Back Arrow” icon.
-Tap on > Skip > Next > Next > No Cable > Copy Without Cable.
-Finally, you will access to (ZTE 9047) screen. From there, we have to use our another android device again to copy google account in this device to Bypass FRP ZTE AXON 40 SE
Note: Do make sure, your both devices are on same WiFi network.
Setup Device from Other Android Phone:
-Let’s open “Google” application in your other android device.
-After that, tap to “Mic icon” and speak loudly there “Setup My Device”.
-From next page, follow the instructions by tapping at > Next > Next > Copy.
-After that, You will have a google verification screen on your ZTE AXON 40 Se device. You have to login there with the same google account, that is already logged-in on your other android device. Once the login process is completed. That means, you have accomplished the frp bypass method successfully.
-You can complete all remaining steps on your own easily.
