Have you lost access to Vortex phone after performing wipe data factory reset process? People go for this option, when they face any software issue on their phone or the phone stuck on logo etc. In this case, they just enter into the android recovery mode and choose the (Wipe Data/Factory Reset) option to fix bugs immediately. But, they don’t know, by doing this, their phone will be locked with FRP protection.
To get this issue fixed, either, they login back with the same Gmail account, that was setup earlier, if they don’t remember their previously set up account, then, go for the alternate process, that is to bypass frp Vortex Phone.
We will use a free (MTK universal tool), which perform very well on many MTK processor phones. We don’t require any lengthy process, its a plug and play method only.
Note: You can apply this method on (Vortex Android 12, 13, 14, 15) and Vortex CG65, Vortex Z22, Vortex J24, Vortex HD65.
Disclaimer: We strongly advise that you use this procedure exclusively on your own device. If you do not own the device, or if it was found, you should return it to its rightful owner. This method is intended solely for educational purposes.
Bypass All Vortex Phone (BY PC)
-Download & Install MTK Universal tool on computer using opera or Microsoft edge browser.
Note: Before downloading the tool, don’t forget the disable (@ntivirus Software) from PC. It’s necessary, if you want to use this free tool. You can prepare your separate PC or for this kind of unlocking activities.
| ⇒ MTK Universal Tool [Download] Pass: MobileTeam |
-Extract and run the downloaded tool by giving already mentioned password.
-After that, check mark option “Erase FRP” from your MTK tool interface.
-Finally, click to “Start” button.
Connect Phone to PC
-Turn off the Vortex phone.
-Hold Volume + and Volume – buttons together and insert the USB cable.
Note: While holding both (Volume up + Down) keys, insert the USB cable to connect with computer.
-Within few seconds, your device will be detected by the tool and it will start performing bypassing frp process.
-Release both holding keys, once you see the (Progress Complete) on MTK tool screen. That means, the frp has been bypassed successfully.
-Let’s disconnect the phone from PC and turn it on.
Complete Startup Steps
-From the first start up screen, go to > Start > Skip.
-Wait until the loading process is completed.
Note: You may have a (Could not connect), because, WiFi is connected, and we don’t need to connect WiFi right now.
-Tap once on the back arrow icon to go back, and you will reach on the (Connect to WiFi) screen.
-Tap to > Setup offline > Continue.
-Its all done, you can finish up all remaining steps on your own and access back to your Vortex phone after bypassing frp successfully.
Conclusion:
We used a free (MTK Universal tool). We just downloaded it on PC and run it. After that, choose the (Erase FRP) option and hit over the (Start) button. After that, turn off the Vortex phone and connected to PC while long pressing the both (Volume up+down) keys. Once the phone is detected, the frp is auto bypassed and then, we finished up the setup wizard steps in offline mode.