Bypass FRP HUAWEI Y9, Y9 Prime EMUI 9.1.0 By SD Card Method

You can now easily Bypass FRP HUAWEI Y9, HUAWEI Y9 Prime EMUI 9.1.0, only by updating your device through firmware, just Download from firmware from below and then copy the “dload” file in your SD Card root directory, after that update your device to bypass google account permanently.

Warning: Follow this method at your own risk, we will not be responsible if anything goes Wrong.

Download Firmware To Bypass FRP HUAWEI Y9/Y9 Prime:

-Select any firmware below that exactly match to your device model number.

⇒ Huawei Y9 2019 JKM-LX1 / JKM-L21 C185 MEA
⇒ Huawei Y9 2019 JKM-LX3 / JKM-L03 C45
⇒ Huawei Y9 2019 JKM-L23 / JKM-L22 C636
⇒ Huawei Y9 Prime 2019 STK-LX2 / STK-L22 C636

⇒ Password for ZIP

-Once you download the firmware in your PC Successfully, just extract the file.

-Connect “SD CARD” in your PC.

-Copy “dload” folder from your firmware, and then past into your SD CARD Root folder.

Note: Make sure your SD CARD is minimum 8GB and it has FAT32 file system, if the SD Card is not FAT32, then Format SD CARD to FAT32, before formatting make sure you have saved your data.

-Now insert SD CARD in your device to Bypass FRP HUAWEI Y9, HUAWEI Y9 Prime.

Let’s Put Device into Update Mode:

-Press and hold (Volume UP + Volume Down + Power) keys together.

-Keep Pressing all keys together.

-Release only “Power Key” once you see HUAWEI Logo on your screen, but keep pressing both volume keys.

-Release both volume keys after you see “EMUI” logo on your screen.

-Perfect, now we have successfully put our device into “Update Mode”, now the device will automatically receive all necessary updates from the dload folder.

-It will take several minutes in installing updates to Bypass FRP HUAWEI Y9, HUAWEI Y9 Prime.

-Once the update installation finish, the device will auto restart.

-The device will also take several minute on “HUAWEI” logo, so just keep patience.

-After that, you will have “Welcome” screen.

-Now put your device into “Recovery Mode”.

-Turn off your device.

-Long Press (Volume UP + Power Key) together.

-Release only (Power Key) once you see “HUAWEI” logo, in the meanwhile keep pressing (Volume UP) key.

-After 4-5 seconds, release also (Volume UP) key.

-After that you will successfully enter into recovery mode.

-To Bypass FRP HUAWEI Y9/Y9 Prime, we have to format our device, so you will precisely lose your data.

-Tap on “Wipe Data/Factory Reset”.

-Type “YES” and then again tap on “Wipe Data/Factory Reset”..

-Again tap on “Wipe Data/Factory Reset”.

-Once the Data/Factory Reset process finish, your device will automatically reboot.

-Congrats, you are done to Bypass FRP HUAWEI Y9, HUAWEI Y9 Prime (EMUI 9.1.0)

Related Post:

⇒ Bypass frp All Huawei EMUI 10.0.0

⇒ Bypass frp Huawei EMUI 9.1.0