Bypass FRP ZTE Blade A34 Android 13, 12 By SPD Tool [Free]
You can get back your ZTE phone just by applying this simple and free method to Bypass FRP ZTE Blade A34 (Android 13 & 12) without using any paid tool. We will use SPD Upgrade tool and ZTE A34 Firmware to flash our device with. After that, your device old forgotten account will be deleted and you will be able to finish up setup wizard steps easily to reach back to your device main homepage.
Disclaimer: We highly recommend you to apply this method only on your own device. If you are not owner of this device, or you found this from some where, you must return to its real owner.
Download Required tool to Bypass FRP:
-You will have to download ZTE Blade A34 firmware & SPD Upgrade tool to fix your device issue.
⇒ ZTE BLADE A34 Firmware + SPD Upgrade Tool [DOWNLOAD]
-Copy SPD Upgrade tool link from notepad and past into your PC browser.
-Click to “Download” button to start downloading process.
-Copy also “ZTE Blade A34 Firmware” download link and past into your pc browser.
-After that, click to “Download” option from there to start downloading process.
-Once the downloading process is done, simply, extract your both downloaded file from winrar archive using already given password.
Let’s Start to Bypass FRP ZTE Blade A34:
-We have to launch SPD upgrade tool by going to “SPD Upgrade tool” folder.
-From there, double click on “Upgrade Download” icon to run this tool in your PC.
-Click to “No” option from popup window.
-We have to load “ZTE Blade A34” flash file by tapping on “Settings” icon from top left corner.
-Select your extracted ZTE A34 Firmware extracted folder.
-Wait once the file is fully loaded in your SPD tool.
-Don’t forget to install proper your ZTE device driver into your PC. After that, your device will be recognized by the PC.
| Note: If you did not install SPD USB Driver in your PC, just download SPD Driver and install according to your PC OS version. |
Connect ZTE to SPD tool & Start Flashing Process:
-Click to “Play button” from SPD tool same as shown below.
-Turn off your ZTE A34 device.
-While pressing “Volume Down” keys, just connect your device with PC.
–Repeat: you have to connect your ZTE device to PC while long pressing (Volume Down) keys. Simply, keep holding Volume down keys and insert USB cable to PC and ZTE device port.
-After that, your device will be recognized by SPD tool and flashing process will continue.
-Wait for several minutes until flashing process is done and you see (Passed) status in SPD tool screen.
-Disconnect your ZTE phone from PC.
-You are all done from Bypass FRP ZTE Blade A34. Turn on device & complete setup wizard steps on your own.
