How to Solve Oppo A37fw Only Vibrate After Flash with Latest Firmware(Last Updated On: August 4, 2020)
Oppo A37fw Only Vibrate After Flash, are you getting this issue ? if yes, then you are getting this problem because you flash your device with wrong firmware, but don’t worry, i hope this post would help you to solve this issue.
To fix this issue, you have to download correct firmware, and that can be downloaded from below, let’s start method to fix Oppo A37fw Only Vibrate After Flash.
Flashing device with correct firmware can fix bypass frp issue, unlock pattern, freezing issue.
Let’s Fix Oppo A37fw Only Vibrate After Flash:
⇒ Download Oppo A37fw Firmware for flashing OPPO device.
⇒ Once downloading finish, extract the downloaded folder from archive.
⇒ After that go to extracted folder, and open “MSM8x39downloadtool.exe” from there.
⇒ Now click on “Verify” button from top right corner in MSM tool window.
⇒ It will start validating in CMD window, at last you will have popup of “OK”, just click on “OK” to close it.
Connect Oppo A37 to Computer:
⇒ While Pressing Volume “UP & DOWN” keys together, insert USB Cable into Oppo device port.
⇒ After that you will see “DISK DEVICE” popup in your “MSM Tool”. (Proof that Oppo Successfully Connected)
⇒ Now click on “Start” button, to start flashing OPPO A37fw device.
⇒ Wait until flashing finish, and you see there “USB Download Completed”.
⇒ After that click on “STOP” button from Msm tool, and disconnect your device
⇒ Now press “Volume Down + Power Key” together to go into recovery mode.
⇒ Tap on “ENGLISH”, then click on “REBOOT” from there to reboot OPPO A37fw device.
⇒ It may take 2-3 minutes to be bypassed from OPPO Logo, just wait, and after that complete “Initial Setup”.
• Download & Extract “OPPO A37fw Firmware”.
• Go to extracted folder, open “MSM TOOL”.
• Click on “Verify”, then connect Oppo device.
• Click on “START” button and wait until finish.
• Reboot Oppo device from recovery mode & Complete initial setup.
Congrats now you have successfully fixed “Oppo A37fw Only Vibrate After Flash” problem.