Finding yourself repeatedly halted at the Google Sign-in screen while attempting to complete the setup wizard on a hard reseted device? This situation arises as your device is secured with FRP lock protection. The Factory Reset Protection is directly associated with the Gmail account that was used previously. If you have entirely forgotten your account details, you can refer to the steps provided here to Bypass FRP Samsung A05swith a verified guide.
This method is working perfectly on models + bit: SM-A057F, Bit (C) | SM-A057G, Bit (9) | SM-A057M, Bit (C) | SM-A057M, Bit (E).
Keep in mind: Do not attempt this Unlock FRP technique on a phone that is not yours; this is a serious offense. If you are attempting to circumvent FRP on a phone that has been stolen, you could face imprisonment. This procedure is intended solely for the rightful owner of the device and for the purpose of education only.
Bypass & Unlock FRP Samsung A05s By PC Software (Free)
We need 2 main tools to accomplish this frp bypass method. 1st is (EDL Cable) and 2nd is (Prime Tool X V26). With the help of these both tools, we can connect our phone to PC and perform frp unlocking process with few clicks. How to arrange both tools? its very easy, just follow up below steps.
Arrange or Make EDL Cable
This cable is required when we need to connect the phone with PC in edl mode. We are gonna use a FRP Bypass PC tool, for this, we are required an EDL Cable. This cable can easily be made at home or you can buy this from mobile market easily. If you don’t wanna spend money, you can follow up link below to prepare an EDL cable easily at home.
| ⇒ Make EDL Cable at Home [Click Here] |
Download & Install Prime Tool X on PC
The prime tool X V26 software is free and can be downloaded and activated with license key in at no cost. We need this PC tool for performing the FRP bypass procedure on our Samsung phone. You can download this tool with the help of below link, and don’t forget to activate the license key as well, all steps already mentioned on the page, where from you will download the tool. Just click the below link an follow up steps from there.
| ⇒ Prime Tool X V26 [DOWNLOAD] |
Check Model & Bit Number
-Firstly, we are gonna check our Samsung A05s model number and binary (Bit) number.
-Turn off Samsung phone.
-Connect it to PC using good quality USB Cable.
-Keep holding simultaneously both keys (Volume UP + Power) until you enter into (Android Recovery Mode).
-After that release both holding keys.
-There, you can check your device complete model number, in below example screen shot, you can see the model is (A057F). The bit number or letter is (C).
Note: Starting 5 digits is always your model number and 5th digit from the end of the build version is your device bit. Here, in below image, you can see complete build version is (A057FXXUCDZB1). In this, start digits are the model number (A057F) and 5th digit from the end of the version is (C), which is bit C.
-We are gonna use the (Prime Tool X V26) on Samsung A05s phone for bypassing the frp lock protection.
-Do make sure, your device has any one of the below model number and bit number exactly matching same as mentioned in below list in order to use (Prime Tool X V26). This method is working perfectly on below list models numbers and bit.
1/ SM-A057F, Bit (C).
2/ SM-A057G, Bit (9).
3/ SM-A057M, Bit (C).
4/ SM-A057M, Bit (E).
-As you can see, we are going to bypass frp on a Samsung A05s (A057FXXUCDZB1). The build version is matching with the 1/ SM-A057F, Bit (C). You have to match like this from the above 4 mentioned list.
| Keep in mind: For example, if your model number is matching with prime tool x model number, but, bit is not matching, such as, your phone phone SM-A057F has bit of (4), then, you may not be able to erase frp because of bit is not the same. For this, either you go for more upgraded version of prime tool x, where you could find same bit supported model or try another tool. |
Let’s Start FRP Bypass Process by Prime Tool X V26
-We have already installed a (Prime Tool X V26) on PC and already prepared (EDL Cable). If did not, just follow up this post from the beginning.
-First of all, we need to install proper drivers on computer before connecting our phone. For this, go to ” Prime Tool X V26” tool on PC and go to “Driver icon” from there.
-After that, install (LibusbK + Qualcomm) drivers mentioned on screen.
-Once its done, let’s go to tabs > Qualcomm > Samsung.
-Select correct model number with correct (Bit). We have mentioned steps already here, how to check your phone model & bit.
-Open up the (Device Manager) on your computer, because, we have to connect our phone to PC in edl mode, for this, we need check, whether phone is detected in edl or not.
Connect Phone to PC in EDL Mode
-Turn off the phone.
-Keep quickly pressing & releasing both (Volume UP + Down) buttons for 5-6 times, after that, keep continuing this action and connect the phone to PC via EDL Cable. Means, while pressing & releasing the (Volume up/down) keys, you need to connect the phone with PC.
Note: If the EDL Cable is prepared at home, keep shortening both wires together while connecting the phone to PC.
-Once the phone is detected in edl mode, simply, unshort the edl cable wires or release edl button.
| For better understanding: If you are confused, how to boot phone into EDL mode, just check out this youtube video, skip the rest making edl cable process till video time 10:00. |
-Let’s move on to the prime tool x software screen and select the correct “Model” number and bit number. Do make sure, both things are matching with your device build version.
-We are gonna select the model (Galaxy A05s | SM-A057F) and Bit is (C), because it thoroughly matching with the device version number (A057FXXUCDZB1).
-You are all setup now, your device is connected to PC in edl mode and you have installed your drivers on pc (Qualcomm + LibUSBk). Let’s click over the “Erase FRP” button and wait for few minutes until you have a (Operation Finalized.) message.
-After you successfully unlock frp Samsung A05s, just disconnect the phone from PC and your device will auto restart. Complete setup wizard steps in offline mode, when you reach on (Connect to WiFi network) page, just skip it and go for next steps.
The Bottom Line
We started this frp bypass process by arranging required tools first. We prepared an edl cable. After that, download and installed (Prime Tool X V26) on PC. Next, we just installed proper Samsung USB drivers on PC from (Prime Tool X) driver section. After that, checked and matched our phone model number + bit with the listed model and bit on prime tool software by going into the phone android recovery mode.
After doing this all, we finally connected our phone with PC in EDL mode with the help of edl cable. Once its done, then, we just clicked over the (Erase FRP) button and within few minutes, it bypassed the frp and reboot Samsung A05s.
FAQs
My device is not being detected by the Prime Tool X, After clicking on the (Erase FRP) button, its not detecting the phone.
You might have not connected the phone with in EDL mode. Open up the device manager on your computer and check out your device port there. Your device must be mentioned there (Qualcomm HS-USB etc) under the (Port) section. You can youtube it, how to connect Samsung phone with PC in edl mode using edl cable.
Is Prime Tool X V26 paid one, do i need to activate the license key?
It can be activated with license key easily. All steps are clearly mentioned in the beginning of this post, how to download and install the prime tool x version 26 and activate license in free.
My Samsung A05s model number is listed in Prime Tool X software, but its not matching with (Bit), should i follow up this method?
If bit is not matching, then, we are not sure that, this method will work or not.






